Center Certification & Testing International
<ul id="yy6ca"></ul> <del id="yy6ca"></del> 
Certification introduction
The "Telecom Equipment Compulsory Testing and Certification Act" issued by the TEC India Telecom Engineering Center will start from October 1, 2019. All telecommunications products, as long as they are produced, imported, distributed or sold in the Indian market, need to pass TEC certification.
Basic information of TEC certification
Is it mandatory: yes
Do you need a local representative: Yes
Whether local testing is required: Yes
Issuing agency: TEC
TEC certification mark
The relationship between TEC certification, BIS certification and WPC certification
TEC: It is the Telecommunication Engineering Center of India. The full name is Telecoummunicateon Engineering Center.
BIS: It is the Indian Bureau of Standards, the full name of The Bureau of Indian Standards, BIS certification and control safety regulations.
WPC: It is an organization that regulates wireless regulations in India. The full name is Wireless Planning and Coordination Wing, and WPC certification controls radio products.
Applicable product range
Communication or network equipment with public network or wide area network (WAN) service interfaces. Common telecommunication network interfaces include T1 / E1, ISDN BRI, PRI ISDN, ADSL, serial and analog PSTN, etc.
TEC certification scheme:
· General Certification Scheme (GCS)-applications must be supported by test reports that demonstrate ER
· Simplified Certification Program (SCS)-The application displays test results when necessary and includes a supplier integrity statement (SDoC).
Product categories controlled by TEC certification (including certification scheme categories)
Administrative Telephone System-SCS
NSD / ISD Public Telephone-SCS
Electronic telephone instrument-SCS
The main telephone system-SCS
2-line feature phone-SCS
Coin Box Phone-SCS
Terminal for connecting to PSTN-SCS
CLIP phone-SCS
Audio Conference Equipment-SCS
Multi-line telephone system-SCS
Group 3 Fax Machine-SCS
Modem-SCS
Cordless phone-SCS
POS terminal-GCS
GPON equipment-GCS
DSL equipment-GCS
loT Gateway-GCS
Tracking equipment-GCS
Smart Meter-GCS
Smart Watch-GCS
Smart Security Camera-GCS
Router-GCS
LAN Switch-GCS
Mobile phone and dongle-GCS
Mobile BTS-GCS
Compact cellular network-GCS
Mobile Repeater-GCS
Microwave communication equipment-GCS
UHF / VHF communication equipment-GCS
Mobile radio trunking system equipment-GCS
The device works in 2.4 GHz and 5 GHz-GCS
Satellite System Equipment-GCS
IP terminal-GCS
Media Gateway-GCS
Signaling Gateway-GCS
Session Border Controller-GCS
Soft switch-GCS
ISDN CPE-GCS
Switch-GCS
Telephone Application Server-GCS
Telephone Media Server-GCS
Multiplexing equipment-GCS
SDH equipment-GCS
DWDM equipment-GCS
Digital Cross Connector-GCS
TEC certified classification
TEC certification is divided into Interface Approval and Type Approval 2 types.
1. Interface Approval is based on Interface Requirements (IR) standards issued by TEC.
2. Type Approval is based on Generic Requirements (GR) standards issued by TEC.
TEC test requirements
· Security requirements: Security and confidentiality requirements
· Technical requirements: Technical requirements
· Safety: Safety
· EMI / EMC: electromagnetic interference, electromagnetic compatibility
· Other requirements: Other requirements
ANATEL certification is a mandatory certification for telecommunications equipment or related equipment by the Brazilian National Telecommunications Administration (Agência Nacional de Telecomunica??es), including wireless communication equipment, wired communication equipment and related auxiliary equipment; this certification ensures that telecommunications equipment sold in the Brazilian market meets Brazil\'s technical standards and regulatory requirements, and guarantees the product\'s quality requirements such as radio frequency, electrical safety, electromagnetic compatibility, and electromagnetic exposure. If the product entering Brazil does not complete ANATEL certification, it may face fines, seizures, and other penalties.
COC certification in Algeria is a mandatory certification for products exported to Algeria, ensuring that the products comply with the country\'s safety, quality, and technical standards. The certification process includes document review, product testing, and factory inspection. Products that pass certification can be legally sold in the local market, protecting consumer interests and promoting fair trade.
GCC certification is the abbreviation for Gulf Cooperation Council certification, which is a mandatory certification requirement for products entering the market in Saudi Arabia and other countries in the Gulf region.
The \"Telecom Equipment Compulsory Testing and Certification Act\" issued by the TEC India Telecom Engineering Center will start from October 1, 2019. All telecommunications products, as long as they are produced, imported, distributed or sold in the Indian market, need to pass TEC certification.
Get a quote
Tik Tok
