Center Certification & Testing International
<ul id="yy6ca"></ul> <del id="yy6ca"></del> 
Project Introduction
The high temperature test is a reliability test that simulates the high temperature resistance of the product during storage, assembly and use. The high temperature test is also the longest used accelerated life test. The purpose of the high temperature test is to determine the adaptability and durability of the storage and use of military and civilian equipment and parts under normal temperature conditions. Confirm the performance of the material at high temperature.
Application range
The scope of high and low temperature testing mainly includes electrical and electronic products, their original devices, and other materials. The rigor of the test depends on the temperature of the high and low temperature and the duration of the test. High and low temperature may cause the product to overheat, affect the safety and reliability of use, or even damage, such as:
· Different materials have different expansion coefficients, leading to bonding and migration between materials
· Changes in material properties
· Decrease electrical performance of components
· The elasticity or mechanical performance strength of the elastic element is reduced, shortening the service life of the product
Accelerate the deterioration and aging process of polymer materials and insulating materials, shorten the service life of products
· The elasticity of flexible materials such as rubber decreases and cracks
· Increased brittleness of metals and plastics, causing cracking or cracking
Make the material brittle, such as plastic and steel are prone to brittle cracking damage at low temperature, the hardness of the rubber material increases, the elasticity decreases, etc.
Method Standard
Test standard reference: GB/T 2423.1, GB/T 2423.2, IEC 60068-2-1, IEC 60068-2-2, EN 60068-2-1, EN 60068-2-2, etc.
Test parameters
High temperature test: test temperature, test time, heating rate.
Performance impact
High temperature test: thermal aging, cracking, discoloration, softening, melting, swelling, or functional failure of materials.
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
The high temperature test is a reliability test that simulates the high temperature resistance of the product during storage, assembly and use. The high temperature test is also the longest used accelerated life test. The purpose of the high temperature test is to determine the adaptability and durability of the storage and use of military and civilian equipment and parts under normal temperature conditions.
Get a quote
Tik Tok
